Introduction
Follow this guide to install drivers for the recommended Monoprice drawing tablet.
- Use the drivers from the CD that came with your tablet, or download them from the Art & Design file server while in the department, or see your instructor or IT support tech.
- Monoprice has different drivers for different models, so be sure you have the correct drivers for your tablet. These instructions are for the supported/recommended 8" x 6" Monoprice tablet.
- Install the drivers before connecting the tablet to your Mac.
-
-
If you don't have the original files, They are also located here: FileStorage/• Software & Tools/Monoprice 8 x 6 Tablet Mac Drivers
-
Log into any A&D lab computer to get access to FileStorage.
-
Copy the entire Monoprice 8 x 6 Tablet Mac Tools folder to your computer (flash drive, cloud storage, etc.)
-
-
-
Open Mac OS X Driver and Software Installer, then open Mac OS X, and then double click on TouchTablet Installer-Monoprice 1.0.pkg to run the driver installer.
-
Complete the installer, and the TouchTablet Application should open. Plug in your tablet USB cable to adjust settings.
-
The TouchTablet Application can be found in the Applications folder.
-
If you have questions, or can't easily use a lab machine to grab the drivers from the departmental server, please see Matt the IT guy.
If you have questions, or can't easily use a lab machine to grab the drivers from the departmental server, please see Matt the IT guy.
