Introduction
This guide will show you how to install and configure the Xerox 7500 driver on your Mac to print via the wireless network. Overview of steps in this guide:
- Verify wireless connection
- Download & Install printer driver
- Set up printer
- Verify set up and Print!
This Xerox 7500 is a color laser printer, and is set up to print to 2 sizes of plain white paper:
- Tray 2 - Tabloid (11 x 17)
- Tray 3 - Letter (8.5 x 11)
- Tray 1 - Manual Feed Tray (for specialty media)
It can duplex (print both sides). Remember to deselect two-sided printing in the Xerox Features pull down print driver menu.
-
-
-
Download the printer driver for Mac OS, by clicking on the accept button on the bottom of the page.
-
Open and run the Xerox Driver Installer package.
-
Continue through the installer steps until you see the Select a Printer window.
-
-
-
Once the installation in complete, the installer will display the Select a Printer window. Disregard the default option, and select the network configuration button on the right.
-
Enter the IP address: 129.65.166.4, and the printer will be recognized on the network and displayed.
-
Click the Continue button to proceed.
-
-
-
In the Setup Printer widow, consider unchecking option Set Printer as Default, unless this will be your primary printer.
-
With the Print Test Page option selected, click the Continue button to complete the setup, and to automatically print a test page to confirm success.
-
The Xerox 7500 is located in the storage area at the back of the room. Retrieve your print to verify printer set up is complete.
-
You can change the Default Printer setting in System Preferences / Printers at any time.
-
